Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 410)

Survey Pro Reference Manual
R-402
Note: The selected segment is shown with a thicker line in the map
view in the lower portion of the Edit Template screen.
Remove : removes the selected segment and automatically joins the
previous segments to the following segments.
Note: When a segment is removed the existing segments toward the
centerline will not change. Only those on the side of the removed
segment away from the centerline are adjusted.
Edit Segment
Roads Edit Templates Edit… Insert… . or
Roads Edit Templates Edit… Edit… . or
Roads Edit Templates New… Insert… .
The Edit Segment screen is identical to the
New Template screen and is used to create a
new template or edit an existing one.
Segment Name: is the name for the segment.
A name is required, but it does not have to be
unique.
Horizontal Distance: is the horizontal length
of the segment.
Slope / V Dist: is the slope of the segment, or
the vertical length, respectively. When
defining a vertical distance, select the ~ D if
the segment travels downward, or select ~ U if the segment travels
upward from the point of view of the centerline.
Note: A segment with a negative slope will result in water that flows
from the centerline toward the road edge.