Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 188)

Survey Pro Reference Manual
R-180
Base Point
: displays the current RTK base point configured in
Survey Pro. If no base is set, this box instructs you to start with one
of the other two options.
Use Current Base>: skips the Base Setup screen, and opens the next
screen required for survey setup. This could be the Rover Setup
screen, the Start GPS Survey – Solve Localization screen, or the Data
Collection screen.
Set New Base> : opens the Base Setup screen. Use this option when
you want to set an RTK base to begin broadcasting corrections, and
also possibly begin logging GPS raw data for post processing.
Use Remote Base>: opens the Rover Setup screen. Use this option
when an RTK base is already set and broadcasting corrections, or
when connecting to an Ntrip server when using VRS and you will
start by connecting to a rover to begin the survey.
Select Geoid Model
The Select Geoid Model screen is used to select
a geoid model to use with your coordinate
system. This screen will open when Set New
Base or Use Remote Base is selected in the
previous screen and you have not previously
selected a Geoid Model.
Geoid Model
: is where you select a model to
use from the drop down list.
File Name
: is where you view the descriptive
name from the geoid data file header for the
File
selected.
File
: is where you view the name of the .GGF data file for the selected
geoid, or pick from a list of .GGF files if more than one data file is
found for this geoid.
Accept : accepts any change to the Geoid Model selection and returns
to the previous screen.