Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 91)

Job Menu
R-83
Edit Polyline
Job View DTM Breaklines… Edit… or
Job View DTM Breaklines… New… .
The Edit Polyline screen is used to perform some preliminary editing
to a polyline prior to accessing the polyline editor with the Edit… key.
Tap Points… : allows you to tap points to define
a new polyline. If a polyline was already
selected prior to accessing this screen, it will be
replaced by the polyline being created.
To / From… : allows you to define a range of
points that define a polyline. If a polyline was
already selected prior to accessing this screen,
it will be replaced by the polyline being created.
Edit… : opens the Polyline Editor, described on
Page R-65, where the polyline can be further
edited.
Clear : will permanently remove the selected polyline from the job.
Properties… : opens the New Line dialog box where the description,
layer and feature attributes can be modified.
: opens the Map Display Options screen (Page R-443) to select
what is displayed on the screen.