Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 371)

Cogo Menu
R-363
Solve : computes the offset points, and stores them if the Store Pts
checkbox is checked.
Station Offset
Cogo Station Offset .
The Station Offset screen will compute and optionally store a point at
a specified station and offset to an existing polyline or alignment.
The elevation for the stored point will always be set to the elevation
of the first node of the polyline, or alignment.
Start Station: is the station for the first node
of the selected line.
Station: is the station on the line where you
want to compute an offset point from.
Offset: is the offset distance that is to the left
(when L is selected) or right (when R is
selected) from the selected line.
; Store Pts : When checked, will store the
computed offset point with the name specified
in the corresponding field.
Tap Line… : opens a window where any
polyline or alignment in the current job can be selected.
To/From… : Opens the Point List screen (Page R-443) where a point
list can be created.
Solve : computes the location of the offset point and optionally stores
the point.