Stake to line – screen two – Spectra Precision Survey Pro v4.5 Ranger Reference Manual User Manual

Page 345

Advertising
background image

Stakeout Menu – GPS & Basic GPS Module

R-337

to configure rover antenna and the backsight information is replaced
with rover antenna height information. See Page R-282 for details.

Stake to Line – Screen Two

The second screen is where measurements take place and the staking

directions are displayed. The graphic and display direct you to points
on line via the shortest route, a perpendicular offset from the rover to

the line.

The graphic display will change depending on
how close you are to the specified line. The chart

below illustrates each screen type.




Note: Tap the graphic portion of the screen for an expanded view.

GPS Status

: displays the current solution type, the number of

satellites used, and the horizontal and vertical precision computed by

Rover is greater
than 3 m (10 ft)
from the line.

Rover is between
0.3 and 3 m (1 and
10 ft) from the line.

Rover is within 0.3
m (1 ft) of the line

Rover is on the line
or within the
Horizontal
Distance Tolerance
specified in the
Stakeout Settings
screen.

Advertising