Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 76)

Survey Pro Reference Manual
R-68
Edit Alignments
The Edit Alignments screen is used to create and edit alignments,
which can then be used with routines such as Offset Staking, Offset
Points, Offset Lines and Road Layout.
Alignments are used to describe all of the horizontal and vertical
details of a road’s centerline. An alignment does not use existing
points to define any particular locations on the alignment, although a
point can be used to anchor the starting location, which is the same
location for both the horizontal and vertical parts of the alignment.
Any location on an alignment where a change occurs is called a node.
An alignment can contain straight sections, grades, horizontal,
vertical, and spiral curves. The horizontal and vertical portions of an
alignment are defined separately and independently, but they are
both combined within the software to create a single alignment with
horizontal and vertical characteristics.
Add / Edit Alignments
Job Edit Alignments or Roads Edit Alignments .
The Add / Edit Alignments screen displays a
list of all the existing alignments in the current
job. The right portion of the screen shows a
graphic of the horizontal and vertical portion of
the selected alignment.
New… : opens the Edit Alignment screen
where a new alignment can be created from
scratch.
Edit… : opens the Edit Alignment screen
where the details of the selected alignment can
be edited.
Delete… : is used to delete the selected alignment.
: The power button opens the following routines: