Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 346)

Survey Pro Reference Manual
R-338
the receiver. If this area of the screen is tapped, the epoch count stops
and the GPS Status screen opens (Page R-172).
Go SOUTH
/ NORTH: displays the distance the rover must move in a
south or north direction to reach the closest point on the line.
Go EAST
/ WEST: displays the distance the rover must move in an
east or west direction to reach the closest point on the line.
OCCUPYING / ROVING : switches from ROVING to OCCUPYING
mode. When ROVING, the receiver is in dynamic mode and will
calculate your position as you move to the point. When OCCUPYING,
the receiver is switched to static mode (depending on settings) and
will calculate the most precise position for the staked point.
Results
/ Current Location: displays either the directions to the
closest point on the line or the current local coordinate.
LEFT of Line
/ RIGHT of Line / ON LINE: displays the position of the
rover with respect to the line. Left and right are relative to north.
ON LINE
is displayed when you are within the Horizontal Distance
Tolerance
specified in the Stakeout Settings screen (Page R- 47 ).
Offset Dist.
: displays the perpendicular offset distance from the line
to the rover.
Station
: displays the station on the line associated with the offset
location. It is relative to the Start Point defined in the first screen.
Results / (N,E,Z) : toggles the display between Results and
Current Location
.
Store : prompts you for a point name and description and stores a
point for the current location.