Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 317)

Stakeout Menu
R-309
Note: The Circle Zero button is not available when using a robotic
total station.
< Back : returns to the previous screen.
Stake > : opens the next screen, which is identical to the third Stake
Points screen, described on Page R-276.
Screen Summary
Screen One is used to define the primary curve to determine the
location of the curve to be staked and the station associated with the
PC Point.
Screen Two is used to define the offset distance and location, the
station to be staked and the station interval.
Screen Three provides the distance and direction information to the
current station to be staked from the occupy point.
Screen Four is used to stake the current station.
Stake Out Point (Tape Offset)
The Store Point (Tape Offset) dialog box allows you to store a point at
a specified offset from the stake point, resulting in a point that is
either closer to, or further away from the total station.
Point: is the name assigned to the new offset
point.
Description: is the description assigned to the
new offset point.
Tape Out/Tape In: is the specified offset from
the stake point. A positive value will result in
a new point that is further away from the total
station. The default value is the appropriate
distance correction to the design point.
: stores the new offset point.