Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 93)

Job Menu
R-85
3D View
Job View DTM 3D View… .
The 3D View screen is used to view the DTM
from any angle.
Setting : opens the 3D View Settings screen,
described below, where the information
displayed in the 3D view can be configured.
Volume : displays the total cut and fill
volume between the area that has been
staked and a reference datum, whose
elevation is specified in the 3D View Settings
screen; or the total cut and fill between the
area that has been staked and the selected DTM.
Datum: displays the datum elevation set in the 3D View Settings
screen.
: Toggles to display or hide the point names and descriptions.
: When this button is activated (pressed in), dragging within the
3D View will result in the image being rotated to any angle. When
the button is not activated, dragging within the 3D View will move
the image to any location.
3D View Settings
Job View DTM 3D View… Setting .
The 3D View Settings screen is used to
configure the information displayed in the 3D
View screen.
; Height Exaggerated to the Maximum :
When checked, the height exaggeration is
automatically set to a high value. When
unchecked, the height exaggeration can be set
manually in the next field.