Spectra Precision Survey Pro v4.5 Ranger Reference Manual User Manual
Page 216
R-208
Origin Height / Origin Scale : is where you enter either the height or
the scale factor used to reference the localization system to ground
level.
Same as Base : updates the values with the coordinate and set up
group of the GPS base station.
Use Geoid:
is where you choose to use a geoid model with this zone.
When this box is checked, you can select a geoid model from the
dropdown list to use with the coordinate system. When this box is
unchecked, no geoid will be used with the coordinate system. You can
pick a geoid model from the database using the drop down box.
Pick from Database : opens the Select Coordinate System screen
(Page R-209) where you can pick a reference stereographic map
projection zone or a solved localization site from the coordinate
system data base file (.csd).
Reset Projection : initializes a new localization reference
stereographic map projection with the input parameters.
Note: To simply assign a geoid to use with the TDS Localization
coordinate system, which will be set up automatically with your first
base, leave all fields of this screen empty and tap Reset Projection .
The geoid setting will be applied to the coordinate system setup
automatically with your first base setup.