Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 248)

Survey Pro Reference Manual
R-240
Adjust All Points
: use this setting when you want to adjust all points.
The method used to adjust plane and geodetic points is described on
the Select Points page.
Adjust only points with geodetic coordinates
: use this
setting when you want to update only geodetic points. The
method used to adjust geodetic points is described on the
Select Points page.
Note: The display of these controls will vary depending on the
difference between the old and new coordinate system. First, if you
change the coordinate system in only one dimension, the display title
will indicate which dimension the setting is for. Second, depending
on how you change the coordinate system, the option to adjust all or
geodetic only may or may not be available. If the choice is not
available, you will see some text describing which points will be
adjusted. Third, if you change both dimensions, and only one
dimension would allow this choice to be active, then the display title
will indicate which dimension the setting is for.
Do Not Adjust Job
: is where you choose to not adjust the job points
with this change of coordinate system.
Details
: displays a description of the change between the two
coordinate system records.
Adjust with Projection – Results
The Adjust with Projection Results screen is
used to preview the results of the adjustment
before it is applied to the job file points.
Show All Points
: when checked, the results list
will show all points selected for the
adjustment, including points that are not
adjusted or which did not change location with
the adjustment. When not checked, the results
list will show only those points that will
change as a result of this adjustment, or points
that did not change because of a projection
error.