Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 426)

Survey Pro Reference Manual
R-418
zeroed on a design point is meaningless once the design point has
been staked.
Note: The Circle Zero button is not available when using a robotic
total station.
< Back : returns to the previous screen.
Stake > : opens the final Stake Road screen where the shots to the
stake point are performed.
Stake Road – Screen Four
Height of Rod: is the length of the rod.
Design Elev: displays the current design
elevation, which can be modified with the
Change… button.
FORWARD / BACK: indicates if the rod must
move forward (toward the total station) or
backward (away from the total station).
Go RIGHT / Go LEFT: indicates if the rod must
move to the right or left from the total station’s
point of view.
EDM: This button can be toggled to shoot in various EDM modes.
The options available depend on the total station being used. Consult
the total station’s documentation for more information on the EDM
modes that it supports.
CUT / FILL: displays the required amount of cut or fill to bring the
stake point to the design point’s elevation.
Rod Elev: displays the elevation at the rod’s location computed from
the last shot.
Change… : is used to modify the current design elevation, which will
also modify the associated CUT/FILL value for the current station
being staked.