Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 329)

Stakeout Menu
R-321
point is stored to it. You can also view this surface with live cut/fill
volumes at anytime from the 3D View screen (Page R-85).
Note: Viewing the DTM during DTM Stakeout is a useful quality
assurance technique to determine where additional points are
needed.
Setup / View DTM : opens the Setup DTM 3D screen (Page R-80)
where the non-reference DTM layers are configured and optionally
viewed from the 3D View screen (Page R-85).
Backsight : opens the Backsight Setup screen (Page R-118) where the
current backsight can be modified.
Next > : opens the next screen.
Choose a Centerline
Stakeout Stake DTM Choose a Centerline… .
The Select Line screen is used to select a
particular polyline or alignment that defines a
centerline. Separate overhead and side views
are displayed for the selected polyline.
Simply select the desired line and tap .