Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 377)

Cogo Menu
R-369
Mid Ordinate : The distance between the curve and the chord at the
center of the curve’s length.
External : The minimum distance between the PI and the curve.
Azimuth / Bearing : defines the direction of the curve, tangent at the
PC.
Turn: defines if the curve turns to the Left or Right while viewing the
curve from the PC Point.
: appends the curve to the list.
Add to Map
The Add to Map screen is used to add the existing line and curve data
to the current job as a polyline.
Description: is the name that will be assigned
to the new polyline that will be added to the
project.
Location : can be used to manually enter the
coordinates for the first point of the polyline.
Point : can be used to define the starting
location of the first point of the polyline by an
existing point.
Store Points: is the first point name that will
be used for the new points that are needed to
add the figure to the current job. All additional
points will be incremented from this point.
: adds the figure to the job at the specified location.
: closes the screen without adding any new data to the job.