Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 413)

Roads Menu
R-405
The Road Card
Roads Edit Roads ( New… or Edit… ) Road .
The Road card of the New Road screen is used to select the alignment
to use for the road. If an alignment has not yet been created, refer to
Page R-68 for information on creating an alignment.
Road Name: is the name assigned to the road.
The name must not be the same as any existing
road name.
Alignment Description: displays the name of
the selected alignment.
Choose Alignment : opens the Choose
Alignment screen where an existing alignment
can be selected.
Check : checks the road for errors and displays
the results in the Roads Report screen.
View Profiles : opens the Road Profiles screen where you can see
information about the cross-sectional profile of the road at any
station.
Set POB… : opens the Road Alignment Properties screen where
information about the current alignment can be changed.
Roads Report Screen
Roads Edit Roads ( New… or Edit… ) Road Check… .
The Roads Report screen displays a list of any errors after performing
the following tests.
• Confirm that the alignment contains both a HAL and a VAL.
• Confirm that the horizontal length of the VAL is greater than
or equal to the HAL.
• Confirm there is at least one template for each side of the
road.