Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 285)

Stakeout Menu
R-277
Change… : is used to modify the current design elevation, which will
also modify the associated CUT/FILL value for the current station
being staked.
Shot : takes a shot to the prism and computes come/go, cut/fill
information.
Shot data: displays the measurements from the last shot.
Store… : stores the stake point.
Store/Tape… : opens the Stake Out Point (Tape Offset) dialog box
(Page R-309), where the staked point can be stored that includes a
specified offset. The default value is the appropriate distance
correction to the design point.
Topo SS… : stores a side shot using the data from the last shot
taken. (This will not take a new shot.)
Turn Gun : (available with robotic total station) turns the total
station toward the design point.
< Back : returns to the second screen.
Stake Next > : returns you to the previous Stake Points screen where
the Design point is advanced by the Increment value.