Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 337)

Stakeout Menu
R-329
Ref. Point: is the reference point specified in
the From Point field in the previous screen.
Description: is the description for the
reference point.
From Gun to Location: displays the angle and
distance information from the total station to
the new point. Users would aim their non-
robotic total station the direction specified
here.
Circle Zero : is used to modify the circle on the
total station so that the angle right reading will
be zero when it is facing toward the design point, which can
sometimes be easier than turning to an obscure angle value. When
this button is tapped, the following actions will occur:
1. A new backsight circle value is computed, sent to the instrument
and stored in the raw data
2. The Angle Right value is changed to zero to reflect the change. The
instrument now needs to be turned horizontally to zero to face the
design point.
3. To prevent errors, the backsight set up is invalidated when
exiting the Stakeout dialog if this button has been used. A Circle
zeroed on a design point is meaningless once the design point has
been staked.
Note: The Circle Zero button is not available when using a robotic
total station.
< Back : returns to the previous screen.
Stake > : opens the third Define a Location screen where the new
point can be staked out.
Note: The third Define a Location screen is identical to the third
Stake Points screen, which is described on Page R-276.