Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 331)

Stakeout Menu
R-323
Desc: is the description that will be assigned to the next stored stake
point.
HR: is the height of the rod.
: opens the Smart Target options (Page R-449).
EDM: This button can be toggled to shoot in various EDM modes.
The options available depend on the total station being used. Consult
the total station’s documentation for more information on the EDM
modes that it supports.
Take Shot… : triggers the total station to take a shot to the prism.
View… : opens the 3D View screen (Page R-85) where a 3D view of
the non-reference DTM surface can be viewed from any angle as well
as cut/fill volume information between two selected surfaces.
Note: The View… button is only available when Generate DTM with
Staked Points is checked in the first Stake DTM screen and at least
three stake points have been stored that do not lie on a straight line.
< Back : returns to the first Stake DTM screen.
Store : will store a stake point for the last point that was shot using
the point name shown in the Point field and the description in the
Desc field. (A new shot is not taken from this button.) The Point field
is then advanced to the next available point name.