Rockwell Automation 1557 MEDIUM VOLTAGE AC DRIVE - Manual (Page 137)

OPERATOR INTERFACE TERMINAL PV-550 REV E 7-13
1557-UM050F-EN-P – June 2013
Setting Date
The calendar setting controls the date stamp which the drive uses on the information contained on
the alarm summary screen. To change the date, press the [F4] key. The year position of the
calendar will be in reverse video. Press the [cursor up] or [cursor down] keys to change the value
by a resolution of 1 unit. Press the [cursor left] and [cursor right] keys to change the value by a
resolution of 10 units. To change the month press the [F4] key again and repeat the procedure.
Likewise to change the day press the [F4] key again. Each press of the [F4] key will highlight the
next position of the calendar. The highlighted position may be modified via the cursor keys.
To abort the change, press the [backspace] key and the calendar will return to its original date.
To accept the change press the [enter] key. The new calendar setting has been recorded.
The setting may also be aborted by pressing any of the assigned function keys (other then F1 and
F4). The function associated with that key will be executed.
The day of the week can not be set by you. The terminal will determine the day of the week
based on the date which you set in the calendar.
Selecting Meters
The utility screen (Figure 10) shows the four tags assigned to the four meters on the 'Top Level
Menu'. These can be changed by pressing the [F8] key. This displays a new screen (Figure 11)
from which the selection and text associated with the meter is changed.
To change the tag attach to a meter, use the [cursor up] and [cursor down] keys to highlight the
desired meter and press the [enter] key. (If nothing happens then you have not gained the
required access to make changes. Press the [F8] key in order to gain access and refer to the
section entitled "Enter/Modify a Password (Access)".
Figure 11 – Select a Meter