Rockwell Automation 1557 MEDIUM VOLTAGE AC DRIVE - Manual (Page 140)

7-16 OPERATOR INTERFACE TERMINAL PV-550 REV E
1557-UM050F-EN-P – June 2013
To modify the user definable text string, press the [F8] key. (If nothing happens then you have not
gained the required access to make changes. Exit to the Top Level Menu screen and refer to the
section entitled "Enter/Modify a Password (Access)" to gain access). A screen typical of Figure 17
will be displayed. To modify the text refer to the section entitled "Edit Text", noting the following
exception. When the text has been entered (as in Figure 18) the enter key has no effect. Simply
press the exit key [F10] to accept the edited string.
Prior to exiting the screen, the string can be returned to its state upon entry to the screen by
pressing the [F7] key.
Transfer Data in Memory
The terminal contains long term storage in two forms. Flash memory contained in the terminal is
used to store the firmware and optionally language modules and parameters used in the drive.
This information can also be stored on a removable flash card which can be taken to another
drive.
In order to transfer information from the two forms of memory, press the [F7] key. This displays a
new screen (Figure 71) from which all flash memory operations are performed. Refer to the
section entitled “ Flash Memory Transfers“ for instructions on these features.
Select a Parameter/Variable
Various operations require that a parameter or variable be selected. All selection operations are
done via one of three methods described in this section. All parameters and variables are
organized into groups. Selecting via groups is the default method.
The screens associated with the selection process are called automatically as part of the
operation from other screens.
Figure 17 – Edit the Drive Name Figure 18 – Editing Complete