Rockwell Automation 1557 MEDIUM VOLTAGE AC DRIVE - Manual (Page 154)

7-30 OPERATOR INTERFACE TERMINAL PV-550 REV E
1557-UM050F-EN-P – June 2013
User Definable Faults
The drive contains a number of external fault inputs. You can custom define the text associated
with these inputs, which will be used on the alarm screen and the fault mask screens. To define
the text, press the [F5] key on the SETUP screen. A screen typical of Figure 49 will be seen.
To modify the text attached to a particular fault input, use the [cursor up] and [cursor down] keys
to select the desired input. To modify the text, press the [cursor right] key. (If nothing happens
then you have not gained the required access to make changes. Exit to the SETUP screen and
refer to the section entitled "Enter/Modify a Password (Access)" to gain access). The first
character position of the string will be in reverse video as shown in Figure 50. Refer to the section
entitled "Edit Text". When editing is complete, the screen will appear as in Figure 51.
The changes made do not take affect until you press [F10] and exit the screen. Any time prior to
this you may cancel all of the changes made after coming to the screen by pressing the [F7] key.
Figure 49 – External Fault Text Setup
Figure 50 – Edit Text for Input 4 Figure 51 – Completion of Editing