Rockwell Automation 1557 MEDIUM VOLTAGE AC DRIVE - Manual (Page 149)

OPERATOR INTERFACE TERMINAL PV-550 REV E 7-25
1557-UM050F-EN-P – June 2013
Restricted mode means that you are restricted to only viewing the drive setup, you can not make
any changes.
Unrestricted mode means you have full unrestricted access to any data in the drive the terminal is
capable of accessing. You must be in this mode to perform the setup operations.
At powerup, the terminal is in Restricted mode. If this is the current mode and you wish to change
any of the setup data, press the [F8] key now in order to access the Unrestricted mode before
proceeding into any of the other setup operations available from this screen. Refer to the section
"Enter/Modify a Password (Access)".
Language Selection
The drive is capable of supporting multiple languages. The terminal supports these languages via
language modules which must initially be loaded via the flash card (refer to the section “Flash
Memory Transfers”).
To select an alternate language, press the [F9] key on the SETUP screen. The screen will show
all language modules currently loaded as in Figure 38. Associated with each language is a
module revision level. Use the [cursor up] and [cursor down] keys to select the desired language
and press the [enter] key.
The terminal will switch to the new language selected. It is possible for other devices attached to
the drive to request a language change. If this occurs, the terminal will switch to the new
language, if the required language module is loaded.
Figure 37 – Unrestricted Mode
Figure 38 – Language Selection