Rockwell Automation 1557 MEDIUM VOLTAGE AC DRIVE User Manual
Page 182
7-58
OPERATOR INTERFACE TERMINAL PV-550 REV E
1557-UM050F-EN-P – June 2013
PanelView 550 PCMCIA Memory Card Installation Data
Description:
The memory card slides into the card slot located on the back side of the PanelView
terminal. These instructions show how to insert the card in the PanelView terminal.
ATTENTION: The memory card should be kept free from moisture,
extreme temperatures, and direct sunlight. Failure to observe this caution
could result in damage to the card.
ATTENTION: Do not subject memory card to flexing or extreme shock.
Failure to observe this caution could result in damage to the card.
Installing the Memory Card
1. Locate the vertical card slot on the back of the PanelView terminal. See Fig. 1
COMMUNICATION CABLE
CARD SLOT
Fig. 1
– Rear view of PanelView