Rockwell Automation 1557 MEDIUM VOLTAGE AC DRIVE - Manual (Page 139)

OPERATOR INTERFACE TERMINAL PV-550 REV E 7-15
1557-UM050F-EN-P – June 2013
The changes made do not take affect until you press [F10] and exit the screen. Any time prior to
this you may cancel all of the changes made after coming to the screen by pressing the [F7] key.
The result of selecting the Link Inductance tag for meter 2 (in our example) is shown in Figure 15
after the METERS screen was exited.
Viewing Revision Levels
For the purpose of maintenance or upgrading of software, the revision levels of all the software
contained in the terminal and the drive may be viewed. To access this screen, press the [F9] key.
A screen typical of Figure 16 shows:
- the type of drive,
- a 16 character, user definable string to uniquely identify a drive,
- revision level of the terminal software and its part number,
- revision level of the bootcode contained in the terminal,
- revision level of various boards contained in the drive. These are identified by a name.
Figure 15 – New Tag for Meter 2
Figure 16 – Revision Level Screen