Metrohm IC Net 2.3 - Manual (Page 119)

6.7 871 Advanced Bioscan
IC Net 2.3 109
Offset Display of current offset.
Data rate Display of current data rate.
Polarity Display of current polarity.
Cycle potentials Graphical display of cycle potentials.
Method Display of working potentials set in the
Method data frame.
Actual Display of current working potentials.
<Set> Send current parameters immediately to the
871 Advanced Bioscan. Parameters are not
stored in the system file (
*.smt ) as long as
the file is not saved.
Scan mode
This subtab of the Scan tab in the 871 Advanced Bioscan window
contains the method parameters for the Scan mode. These va-
lues are sent and applied to the 871 Advanced Bioscan by
Start
determination and Startup hardware , or if the values are sent manu-
ally with <Set> .
Parameters
Startup values