Metrohm IC Net 2.3 - Manual (Page 160)

6 Devices
IC Net 2.3 150
6.15 754 Dialysis Unit
6.15.1 754 Dialysis Unit features
The Metrohm 754 Dialysis Unit is a unit for on-line sample dialy-
sis before sample injection. It consists of a 2-channel peristaltic
pump and a dialysis cell.
The 754 Dialysis Unit, which is normally operated manually using
the keypad of the instrument or automatically via 732 IC Detector
via remote interface, can be fully operated using the «IC Net»
program. The 754 Dialysis Unit is normally connected to one of
the event line connections of the 762 IC Interface using the op-
tional 6.2128.180 cable. Examples for interconnections with the
754 Dialysis Unit can be found in the 762 Instructions for Use.
In order to operate the 754 Dialysis Unit with «IC Net», the exter-
nal control must be switched on using the [ Remote ] key.
For detailed information about the 754 Dialysis Unit see 754 In-
structions for Use.
6.15.2 754 Dialysis Unit icon
The 754 icon is available in the SYSTEM window if a 754 Dialysis
Unit has been installed with the New system wizard or by using the
Setup/New devices/Install new device option of the SYSTEM window
(see section 6.1.2).
If the system is connected and the
754 icon is clicked with the
right mouse button, the following menu appears:
Open Open the 754 Dialysis Unit window for parameter set-
tings (this window can also be opened by double-
clicking the icon).
Unlink Delete the 754 icon from the system.
6.15.3 754 Dialysis Unit window
754 icon / Open
The
754 Dialysis Unit
window for parameter settings is opened by
selecting this menu option with the right mouse button or by dou-
ble-clicking the
754 icon in SYSTEM window. It consists of the three
tabs Manual , Program , and Links .