Metrohm IC Net 2.3 - Manual (Page 59)

5.3 830 IC Interface
IC Net 2.3 49
Events setup
The Events setup tab of the 762 System [#] window contains the
startup values for the seven event output lines of system 1 or
system 2 of the 762 IC Interface. These startup values are sent
each time the system is connected or a determination is started.
Each event output line can be set to the following values:
0 Line off, inactive (open)
1 Line on, active (0 V)
For technical information see 762 Instructions for Use.
5.3 830 IC Interface
5.3.1 830 IC Interface features
The Metrohm 830 IC Interface is available as a two system ver-
sion (2.830.0020). Each system can control a complete ion chro-
matography or HPLC equipment and contains the following parts:
• Two 24-bit Analog-to-Digital Converters (often abbreviated
as ADC) to acquire two analog signals from two different de-
tectors simultaneously (for example conductivity detection and
UV detection).
• One external start input.
• RS232 communication ports to control up to eight devices
of a complete ion chromatography equipment.
• Seven Event output lines.
The 830 IC Interface is normally connected to a PC COM port us-
ing the 6.2134.100 connecting cable.
For detailed information about the 830 IC Interface see 830 In-
structions for Use.