Metrohm IC Net 2.3 - Manual (Page 196)

6 Devices
IC Net 2.3 186
6.24 788 IC Filtration Sample Processor
6.24.1 788 IC Filtration Sample Processor features
The Metrohm 788 IC Filtration Sample Processor is a sampler
for automatic filtration and injection of samples. It has a capacity
of up to 127 samples each with an effective volume of up to
11 mL.
The 788 IC Filtration Sample Processor, which is normally oper-
ated using the keypad of the instrument, can be fully operated us-
ing the «IC Net» program. The 788 IC Filtration Sample Processor
is normally connected to the 762 IC Interface using the
6.2134.080 or 6.2134.090 cable. If the injection valves at the 733
IC Separation Center are to be controlled by the 788 IC Filtration
Sample Processor, the 6.2141.110 cable is required for the con-
nection of the 788 IC Filtration Sample Processor and the 732 IC
Detector. Examples for interconnections with the 788 IC Filtration
Sample Processor can be found in the 762 Instructions for
Use.
In order to operate the 788 IC Filtration Sample Processor with
«
IC Net», the following RS settings have to be made using the
[
CONFIG ] key on the 788 keyboard:
>RS232 settings
handshake: SWChar
RS control: ON
For detailed information about the 788 IC Filtration Sample Proc-
essor see 788 Instructions for Use.
6.24.2 788 IC Filtration Sample Processor icon
The
788 icon
is available in the
SYSTEM
window if a
788 IC Filtration
Sample Processor has been installed with the New system wizard or
by using the Setup/New devices/Install new device option of the
SYSTEM window (see section 6.1.2).