Metrohm IC Net 2.3 - Manual (Page 39)

4.1 System creation
IC Net 2.3 29
For every device to be controlled with «IC Net», open the group
which contains this device, select the device and the
Serial port of
the interface where the device is connected to. After clicking on
<Add to system> , the device is added to the SYSTEM window. If
desired, an additional data recorder and a timer of the More mod-
ules group can be added to the system.
After clicking on <Next> , the window for selection of processing
method linked to the system and data source appears (details
see section 6.1, 6.2).
After clicking on <Finish> , the user is asked to save the new sys-
tem as a system file ( *.smt ) in the new system folder. The new
system is now ready to start a determination (see section 4.3.3).
4.1.2 System window
A system window is opened with IC NET / File / Open / System and
the selection of the desired system file. It contains icons for Data
recorder, Watch window (screen) and all the devices installed
with the system wizard.