Metrohm IC Net 2.3 - Manual (Page 178)

6 Devices
IC Net 2.3 168
If no time is entered, the program instruc-
tion is applied together with the last instruc-
tion with time entry.
Second column Program instruction (see below).
Third column Parameter for program instruction (see be-
low).
ENABLED Enable program start (a disabled program
is not started).
<Add> Add new program instruction.
<Delete> Delete selected program instruction.
<Verify>
Test the time program (error messages are
displayed if program is wrong).
List of program instructions
The following program instructions can be added to the time pro-
gram on the
Program page:
Instruction Parameter entry Meaning
Pump on, off Switch on or off the pump drive.
(available for all versions)
Step Rotate suppressor or sample
prep module to the next position.
(only available for 833 IC Suppres-
sor Unit and 833 IC Sample Prep
Unit )
Links
The Links tab of the 833 IC Pump Unit is used for Event line selec-
tion.