Metrohm IC Net 2.3 - Manual (Page 38)

4 Systems
IC Net 2.3 28
After clicking on <Next> , the window for addition of interfaces to
the toolbar appears. This step can be skipped if the desired inter-
face has been already added to the toolbar (see section 5.1.2). If
this is not the case, the interface has to be selected from the
Metrohm Interfaces or Bischoff Interfaces groups. After selecting the
serial port where the interface is connected to and clicking on
<Add to workplace> , the interface icon will appear on the toolbar
(PC Boards will not appear on toolbar).
After clicking on
<Next>
, the window for addition of devices (see
6.1.1) to the system window appears.