Metrohm IC Net 2.3 - Manual (Page 132)

6 Devices
IC Net 2.3 122
First column Time at which program instruction is ap-
plied.
Entry range:
0.0 ... 999.9 min
If no time is entered, the program instruc-
tion is applied together with the last instruc-
tion with time entry.
Second column Program instruction (see below).
Third column Parameter for program instruction (see be-
low).
ENABLED Enable program start (a disabled program
is not started).
<Add> Add new program instruction.
<Delete> Delete selected program instruction.
<Verify> Test the time program (error messages are
displayed if program is wrong).
List of program instructions
The following program instructions can be added to the time pro-
gram on the
Program page:
Instruction Parameter entry Meaning
ValveA fill, inject Switch injection valve A to “ fill ” or
“ inject ” position.
ValveB fill, inject Switch injection valve B to “ fill ” or
“ inject ” position.
Step
Rotate suppressor to the next
position.