Metrohm IC Net 2.3 - Manual (Page 236)

6 Devices
IC Net 2.3 226
For detailed information about the 838 Advanced Sample Proc-
essor see 838 Instructions for Use.
Time program
On the Program tab of the 838 Advanced Sample Processor window
a user-defined time program can be entered. This program is
started automatically as defined in the
Start mode window (see
section 4.4.3) either at the moment the determination is started
(
Start with determination
) or at the moment the sample is injected
( Start with inject ).
Num Row number (read-only).
Task Program instruction (see below).
Parameter Parameter for program instruction (see be-
low).
Enable Enable program start (a disabled program
is not started).
<Add> Add new program instruction.
<Delete> Delete selected program instruction.