Metrohm IC Net 2.3 - Manual (Page 155)

6.13 752 Pump Unit
IC Net 2.3 145
Manual
The Manual tab of the 752 Pump Unit window for manual operation
is only available for a connected system.
Pump
<On> Start pump drive.
<Off> Stop pump drive.
Start pump with startup hardware
Automatic start of pump drive with Startup
hardware .
Time program
On the Program tab of the 752 Pump Unit window a user-defined
time program can be entered. This program is started automati-
cally as defined in the
Start mode window (see section 4.4.3) either
at the moment the determination is started ( Start with determina-
tion
) or at the moment the sample is injected (
Start with inject
).
First column Time at which program instruction is ap-
plied.
Entry range:
0.0 ... 999.9 min
If no time is entered, the program instruc-
tion is applied together with the last instruc-
tion with time entry.
Second column Program instruction (see below).
Third column Parameter for program instruction (see be-
low).