Links – Metrohm IC Net 2.3 User Manual
Page 186
6 Devices
IC Net 2.3
176
Manual injection
Sample vial number
Number of sample vial to be used for man-
ual injection.
<Select>
Selection of the vial number (
1...128
).
Count of injections per vial
Number of injections per vial (
1...4
).
<Select>
Selection of the injection number (
1...4
).
Needle lowering type
Injection number
Position where the needle is moved to in
case of multiple injections (
1...4
).
Absolute position
Position where the needle is moved to in
case of single injections (
1...4
).
Rinse type
Standard shift
Use
previous
or
next
vial for rinsing.
Nonstandard shift
For every sample, skip this number of vials
and use this vial for rinsing.
No rinse between different sample vials
No rinsing.
Data acquisition started by software
If this option is enabled, the data acquisi-
tion is started with "Inject". No cable is re-
quired between the injection valve and the
interface.
If this option is disabled, the 6.2115.070
cable is needed to start data acquisition.
<Inject>
Start
injection.
For detailed information about the 750 Autosampler see 750 In-
structions for Use.
Links
The
Links
tab of the
750 Autosampler
is used for COM port selec-
tion and settings (details see section 5.2.4 Links).