Metrohm IC Net 2.3 - Manual (Page 74)

6 Devices
IC Net 2.3 64
After clicking on <Next> , the window for addition of interfaces to
the toolbar appears (details see section 4.1.1).
After clicking on
<Next> , the window for addition of devices to the
system window appears.
For every device to be controlled with «IC Net», open the group
which contains this device, select the device and the
Serial port of
the interface where the device is connected to. After clicking on
<Add to system> , the device is added to the SYSTEM window. If
desired, an additional data recorder and a timer of the More mod-
ules group can be added to the system.
Details to the other steps of the system wizard procedure (proc-
essing method, data source) see section 4.1.1.