Metrohm IC Net 2.3 - Manual (Page 143)

6.11 818 IC Pump
IC Net 2.3 133
Pmax 0.0 ... 30.0 MPa Set maximum pressure limit for
the high pressure pump to the
desired value.
Pmin 0.0 ... 30.0 MPa Set minimum pressure limit for the
high pressure pump to the de-
sired value.
Links
The Links tab of the 818 IC Pump is used for COM port selection
and settings (details see section 5.2.4 Links).
Advanced
The Advanced tab of the 818 IC Pump window is only available for a
connected system.
Correction factor Flow correction factor to adjust the dis-
played flow to the actual flow measured
with the aid of a measuring cylinder.
Entry range:
0.90 ... 1.10
<Set> Send current Correction factor value to the
818 IC Pump. This parameter is not stored
in the system file (
*.smt ) as long as the file is
not saved.