Metrohm IC Net 2.3 - Manual (Page 189)

6.23 766 IC Sample Processor
IC Net 2.3 179
<Stop> Stop moving the rack to place the specified
vessel at the needle.
Position Selection of the vessel to be placed at the
needle.
Selection:
sample, sample+1, spec.#, 1...n
Lift
<Start> Start raising or lowering the lift to the speci-
fied position.
<Stop> Stop raising or lowering the lift to the speci-
fied position.
Position Selection of the position.
Selection:
shift, work, rinse, special, 0, 1...125
mm
Pump
<Start> Switch on peristaltic pump at the tower for
the specified time.
<Stop> Switch off peristaltic pump at the tower.
Time Selection of the pump time.
Selection:
on (infinite), 1...999 s
Control
<Set> Send specified signal via remote control
lines of the 766 IC Sample Processor.
Control lines Selection of special remote line commands
or individual control line settings (details
see 766 Instructions for Use).
Program
<Start> Start program of the Program tab.
<Stop> Stop program of the Program tab.
Sample
<Set> Sample number for manual program start.
Number Selection of the rack position.
Selection:
1...n
For detailed information about the 766 IC Sample Processor see
766 Instructions for Use.