Metrohm IC Net 2.3 - Manual (Page 250)

6 Devices
IC Net 2.3 240
Conductivity, µ S/cm Live display of measured conductivity.
Pressure, MPa Live display of measured pressure.
The color settings for this two fields can be
changed by clicking the fields with the right
mouse button (see section 6.2.2).
Actual values Display of actual values.
Flow, mL/min Display of current flow rate of the high-
pressure pump.
Pressure max, MPa Display of current maximum pressure limit
for high-pressure pump.
Pressure min, MPa Display of current minimum pressure limit
for high-pressure pump.
Full scale, µ S/cm Display of current full scale range.
Remote lines Display of current remote line settings.
Valve
Injection valve.
<Inject> Switch injection valve to "INJECT" position.
<Fill> Switch injection valve to "FILL" position.
Suppressor Suppressor module «MSM II».
(inactive with version 2.861.0010)
<Step> Switch the suppressor module to the next
position. The time since the last switching
of the suppressor module is displayed in
the field beside the
<Step> button.
IC pump High-pressure pump.
<On> Start high-pressure pump.
<Off> Stop high-pressure pump.