Metrohm IC Net 2.3 - Manual (Page 40)

4 Systems
IC Net 2.3 30
4.1.3 Add devices to an existing window
SYSTEM / Setup / New devices/ Install new device
Add new devices to the open SYSTEM window. For every device
to be added to the system, open the group which contains this
device and select the device and the serial port of the interface
where the device is connected to. After clicking on
<Add to sys-
tem> , the device is added to the SYSTEM window. If desired, an
additional data recorder and a timer of the More modules group
can be added to the system.
4.2 System file handling
The following menu items are used for opening, changing, saving
and closing of systems:
IC NET / File / Open / System
Load an existing system file ( *.smt ) from the Systems directory and
open the corresponding SYSTEM window. The name of the folder
and of the system file are displayed in the title bar of the SYSTEM
window. A star ( * ) at the end of the name indicates that the sys-
tem settings have been changed since the last saving.
SYSTEM / System / Open other
Load an existing system file ( *.smt ) from the desired system folder
in the Systems directory and open a new SYSTEM window for pa-
rameter settings. The old system remains connected.
SYSTEM / System / Change
Open the selected new system in the desired system folder. The
current system is disconnected and closed, and the new system
is connected.
SYSTEM / System / Save
Watch window
Data recorder
Devices