Metrohm IC Net 2.3 - Manual (Page 75)

6.2 Watch window
IC Net 2.3 65
6.1.2 Install new devices in system window
SYSTEM / Setup / New devices/ Install new device
Add new devices to the open SYSTEM window using the New
system wizard window (see above). For every device to be added
to the system, open the group which contains this device and se-
lect the device and the serial port of the interface where the de-
vice is connected to. After clicking on
<Add to system>
, the device
is added to the SYSTEM window. If desired, an additional data re-
corder and a timer of the More modules group can be added to
the system.
6.1.3 Install existing devices in system window
SYSTEM / Setup / New devices/ Link to existing device
Add devices to the open SYSTEM window which
are already present on the toolbar. This is mostly
used to add the
830 IC Interface events
. For every
device to be added to the system, select the de-
vice and click on
<OK> .
6.1.4 Delete devices
Icon / Unlink
Devices in a SYSTEM window can be deleted by clicking on the
device icon using the right mouse button an select the Unlink
menu item.
6.2 Watch window
6.2.1 Watch window icon
The watch window icon is one of the components always pre-
sent in a new
SYSTEM window. If the system is connected and
this icon is clicked with the right mouse button, the following
menu item appears:
Open Open the WATCH WINDOW for live display of
instrument values (this window can also be
opened by double-clicking the watch win-
dow icon).
Unlink Delete the WATCH WINDOW from the SYS-
TEM window (not recommended).