Metrohm IC Net 2.3 - Manual (Page 51)

5.1 Interface installation
IC Net 2.3 41
Metrohm Interfaces or Bischoff Interfaces groups. After selecting the
serial port where the interface is connected to and clicking on
<Add to workplace> , the interface icon will appear on the toolbar
(PC Boards will not appear on toolbar).
Details to the other steps of the system wizard procedure (in-
stallation of devices, processing method, and data source) see
section 4.1.1.
5.1.2 Add interfaces in workplace window
IC NET / Options / Devices setup
Open the WORKPLACE window which shows all interfaces and
devices installed. This window can be opened only by the user
with
Administrator access level.