Metrohm IC Net 2.3 - Manual (Page 242)

6 Devices
IC Net 2.3 232
Needle positions
Needle positions
Height, mm Lift position of special needle position in
mm.
<Add> Add a new special needle position.
<Delete>
Delete the selected special needle position.
Settings
Lift rate Lifting rate for the needle in mm/s.
Maximum lift way
Lowest lift position possible in mm (read-
only).
Entry range:
0..235 mm , default 125 mm
Maximum swing angle
Maximum swing angle possible in ° (read-
only).
Entry range:
0..330 ° , default 117 °
<Edit> Change maximum possible lift way and
swing angle.
<Set> Send parameters to 838 Advanced Sample
Processor.