Metrohm IC Net 2.3 - Manual (Page 127)

6.8 733 IC Separation Center
IC Net 2.3 117
<Add> Add new program instruction.
<Delete> Delete selected program instruction.
<Verify> Test the time program (error messages are
displayed if program is wrong).
List of program instructions
The following program instructions can be added to the time pro-
gram on the
Program page:
Instruction Parameter entry Meaning
ValveA fill, inject Switch injection valve A to “ fill ” or
“ inject ” position.
ValveB fill, inject Switch injection valve B to “ fill ” or
“ inject ” position.
Step Rotate suppressor to the next
position.
Links
The Links tab of the 733 IC Separation Center is used for COM port
selection and settings (details see section 5.2.4 Links), resp. for
Event line selection.