Altera ALTPLL (Phase-Locked Loop) IP Core User Manual
Page 69
Changes Made
Version
Date
• Updated the following sections:
• “Device Family Support” section
• “Introduction” section
• “Features” section
• “General Description” section
• “Design Examples” section
• “Simulation” section
• “Ports and Parameters” section
• “How to Contact Altera” section
• Removed the following sections:
• “Resource Utilization & Performance” section
• “Software and System Requirements” section
• “Instantiating Multifunction in HDL Code” section
• “Identifying a Multifunction after Compilation” section
• “Signature II Embedded Logic Analyzer” section
• Reorganized the “Using the MegaWizard Plug-In Manager” section into
table format.
• Renamed “About this User Guide” section to “Additional Information” and
moved the section to the end of the user guide.
7.0
December 2008
Updated for software version 7.0, including:
• Added support for Cyclone III devices
• Added Referenced Documents section
6.0
March 2007
Updated to reflect new document organization, additions, and GUI changes for
Quartus 6.1, including adding information relating to Stratix
®
III devices
5.0
December 2006
Updated to reflect new document organization, additions, and GUI changes for
Quartus 6.0
4.0
May 2006
Updated to reflect new document organization and GUI changes
3.0
December 2004
Altera Corporation
ALTPLL (Phase-Locked Loop) IP Core User Guide
69
Document Revision History
ug-altpll
2014.08.18