ATEIS DIVA8G2 - Manual (Page 153)

System Functionality 153
© 2012 ATEÏS
o Order: Display the order of the slave from a DIVA configuration point of view (independant
from ID setting).
o State: Indicators that shows the status of the slave unit. Only working when real-time
connected to the master.
o Name: Displays the name of the slave unit, only for configuration purposes. The name can be
changed to suit your need by simply clicking in the name box.
o Net ID: Displays the current slave unit ID.
To add a slave unit to your configuration, simply click the "Add" button.
To delete a slave unit from your configuration, select the slave in the list and press the "Delete"
button.
For each slave added, you can specify its Net ID. Click in the Net ID box and use the appearing
drop-down menu. The ID must fit the slaves' hardware ID settings.
Once all the slaves have been set in the configuration, make sure to verify their firmware version
using the version menu and update version if needed.
When slaves are configured as existing, in all zone selection sub-menu, the slaves' zones will appear as
selectable as well as slave GPIO relay, see below for an example.
Using slave does not change the way you'll program the DIVA, it only add more contacts and zones.