ATEIS DIVA8G2 - Manual (Page 186)

DIVA system 186
© 2012 ATEÏS
VO3: 530 Ohm
Voice: 545 Ohm
Music: 540 Ohm
When music is routed to zone 1, the display shows 540 Ohm. As soon as a Voice call is routed on
the zone 1, the display will show 545 Ohm. If no music or no voice call is routed on zone 1, the
display will show 530 Ohm.
The schematics above explain how the different channel are routed to zone(S) and how the
impedance measurement is made. Signal VSix, VSgx, ISix and ISgx are computed into DSP and
then compared to reference values.
The real measure is made with A and B in parallel. In the case the measured value differs from the
reference value, Line A will be measured independently and compare to the Line A reference and the
same process is done for Line B.
5.2.15 Use Presets
The DIVA application allows user to create different preset that can control audio settings (audio levels
on each source, hi-pass and low-pass filter settings, compressor-limiter settings). Loading a preset will
change the current audio settings; you can adjust audio settings for different situation using several
presets.
In order to create a preset, please follow the next few steps.
To create a new preset, click on the Add button in the preset toolbar
By default, the preset created is named untitled X. You can rename it by clicking on the Name
button in the preset toolbar.