ATEIS DIVA8G2 - Manual (Page 215)

System Functionality 215
© 2012 ATEÏS
In many event you will be able to choose some pre-defined zones. Here is the zone selector display
and explanation.
From Left to right and up to down
Master 1: correspond to your project name (master unit plus slave ones)
o All: selects all zones of master and slave(s) units .
Master: means master unit
o All: selects all zone of the master unit.
o 1-8: allows to select independently zone 1 to 8 from a master and/or slave unit.
Cancel All and Coexist options
The Cancel All and Coexist options have been created to manage conflict when two events using
common zones.
The higher priority event always overwrites the lowest priority event in the common zone. But
regarding to the option chosen, the behaviour is different.
To learn more, please read this.
5.6.2 Event Sequence
You can define multiple events by accessing the event window (menu “View -> Event”). In this window,
all the existing events are listed. You can add/delete events.
Before adding a new event, choose in the “Event Type” drop-down menu the desire event’s type. Click on
the new event then “Edit” to be able to set up parameters for this new event.
You can declare event with the same action, like playing a message (even playing the same message).
You just have to give them different names.
The event can be cascaded. An explanation diagram is visible on the next figure.