ATEIS DIVA8G2 - Manual (Page 180)

DIVA system 180
© 2012 ATEÏS
o Link by: By clicking the "a" icon, it will open a display in which you will find the CH X already
existing trigger (Bypass, Busy, Acknowledge, Active at start or active at stop relay).
Click on the Edit button of the channel you want to use as a bypass relay, the following matrix
window will pop up, see below:
With the bottom left drop-down menu, you will be able to specify for each source type (Music 1,
Music 2, Normal message, Evac message, PSS) the zone in which the source has to be routed
to activate the relay.
Click OK to validate.
Note: for each of the 8 output relays, you can specify multiple zone-source routing for the relay
activation.
5.2.14 Use Monitoring
In order to access and activate zones monitoring and/or amplifiers monitoring, click on the monitoring
button under DIVA icon in the master window, see below.