ATEIS DIVA8G2 User Manual
Page 90
DIVA system
90
© 2012 ATEÏS
Mode:
o
No Fault Report on PSM: If ticked, no DIVA fault status will be shown on the PSM fault
LED.
o
No Fault If Missing: If ticked, DIVA won't display a fault if the PSM is not physically
connected.
o
Press To Talk: This option change the behaviour of the Mic key on the PSM screen from
"Lock to Talk" to "Push to Talk". For calling in "Push to Talk" mode, you have to keep the
PSM Mic key press as long as you want to talk.
o
Security source/Evacuation source: If ticked, you will be able to use the PSM microphone
when DIVA has entered into the security mode. When ticked, it adds the option Evacuation
Source. If evacuation source is selected, the paging from the PSM will act like an evacuation
event. So the front panel EVAC LED ill light up.
Chime selection:
o
Pre: Allows the addition of a chime message at the beginning of a microphone call. Simply
choose the prechime message from the drop down menu.
o
Post: Allows the addition of a chime message at the end of a microphone call. Simply
choose the post-chime message from the drop down menu.
Options:
o
Buzzer ON: This option allows user to enable the PSM buzzer. It will beep for any DIVA fault
status and for PSM internal fault.
Monitoring:
o
Pre Amp: Virtual LED that will light up in case of PSM microphone pre amplifier failure.
o
SPK Cable: Virtual LED that will light up in case of PSM integrated loudspeaker connection